CGZ9325廣東辰鋼玻璃直線磨邊機  周經理 ●適用于不同厚度和尺寸的平板玻璃直線邊及45°棱邊的磨削加工。 ●粗磨、精磨、拋光和倒角一次加工完成。 ●前后大梁、底座床身及各磨頭調節座均采用優質鑄鐵材料，經過長時間高溫退火處理，然后分粗、精加工而成，承受負荷大，性能穩定。 ●前后壓板均采用40Cr鍛打材料，對摩擦表面進行高頻淬火處理后精磨，使得更加耐用。 ●“新東亞”品牌專用磨頭電機，“正泰”品牌電氣，“東華”品牌鏈條。 ●結構先進、準確度高、操作方便、工作效率高，大批量工藝、家具、家電、建筑等行業的玻璃磨邊加工優選設備。   ●It is suitable for straight-line beveling for flat glass of  different thickness and sizes, and 45 ° grinding of edges. ●coarse grinding、fine grinding 、 polishing and chamfering can be completed in one time,its11 grinding heads have a powerful function to eliminate lines of glass,which can strongly improve the polishing brightness of glass. ●The base 、front and rear beams、beds and grinding heads are of casting materials (annealed to prevent deformation),Which can  bear large loads and  has  stable performance。 ●The front and rea plates are made of 40Cr forged materials,whose surfaces is much more durable with high-frequency quenching treatment after fine grinding. ●Special head motor from "New East Asia",electric from"Zhengtai", brand chain from "Donghua"。 ●This machine is flexible operation, high working efficiency and wide range of application，its  the preferred equipment especially for  furniture and building industry,and so on.   較大加工尺寸 3000mm×3000mm 較小加工尺寸 80mm×80mm 玻璃加工厚度 3mm-25mm 玻璃傳送速度 0.5m/min-5m/min 總功率 19Kw 總重量 3200kg 外形尺寸 7000mm×1000mm×2500mm